asbclogr.gif (5107 bytes)

Albany Steel & Brass Corporation
SUCCESSORS TO LEBOVITZ BROTHERS
red.gif (38700 bytes)
DISTRIBUTORS OF FASTENERS AND INDUSTRIAL SUPPLIES
SINCE 1918
red.gif (38700 bytes)
1900 W. GRAND AVE.     CHICAGO, ILLINOIS  60622
PHONE: 312-733-1900                 FAX: 312-733-9887
ISO 9001:2008

Click here for our Current Specials!

AlbanyLineCard.gif (467005 bytes)

you_tube_0.png (3111 bytes)

Click here for Overstock Specials

Home Up

Anchors - Concrete, Wall Board, Drywall, Masonry, Toggle Bolts, Dropin Bolts- Cap Screws, Carriage, Dowel, Elevaor, Hex, Lag Screw, Plow, Structural, Tap Forged Hardware- Eye Bolts, Eye Nuts, Turnbuckles Inserts- Concrete, Knurled, Wood Nuts- Acorn, Castle, Coupling, Finish Hex, Jam, Locknuts, Heavy Hex, Keps, Nylon Stop, Square, Wing Rivets- Non-Stuctural, Closed End, Structural Self Plugging, Monobolts Screws- Deck, Dowel, Type U, Type 21, Drywall, Knurled, One-Way, Particle Board, Self Piercing, Self Drilling, Teks, Thumbscrews Threaded Rod- Fine Thread, Course Thread, Brass, Stainless Washers- Bevel, Bonded, Countersunk, Fender, Finishing, Flat, SAE, Locking, Malleable, Ogee, Rubber, Structural, Wave

Anchors        

ANCHOR TYPE

USE IN

USE WITH

Made of

SIZE RANGE

GENERAL INFORMATION

Bantam Plug

Concrete, block, tile, brick

Sheet metal, wood or lag screw

Corrosion-resistant plastic

#6-8 x 3/4" to #14-16 x 1-1/2"

Light duty, multi-size anchor with a collar for use in hollow material.

CAD-SCREW®

Steel (18, 20, 22 gauge) and wood

Big Fella or little guy tool

Stainless steel

12-11 x 1-5/8" to 12-11 x 8"

Fast, gimlet pointed screw with a Phillips head.

Calk-ln (AJ.Anchor)

Concrete, brick, stone

Machine screw or bolt

Zinc alloy and lead

6-32 to 3/4"-10

Single unit calking anchor which can be set shallow (flush) or deep in hole.

Chem-Stud™

All solid masonry

Threaded rod, reinforcing bar

Polyester resin capsule, steel

3/8" x 5-1/8" to 1-1/4" x 15"

Sell-contained adhesive capsule Anchor has high load capacities and is shock resistant.

Double Machine Bolt Shield

Concrete, brick, stone

Machine screw or bolt

Rustproof zinc alloy

1/4" to 3/4"

Heavy duty non-calking bolt anchor.

Fluted Plastic Screw Anchor

Concrete, brick, stone

Sheet metal, wood or lag screw

Ductile plastic

#4-6 x 1" to #14 x 1-1/2"

Light duty, acid-resistant anchor in 4 color coded diameters.

Forming SPIKE®

Concrete

Metal, wood, concrete forms

Steel

3/16 x 1-1/2" to 1/4" x 2-3/4"

Double headed, removable, reusable anchor for temporary applications

H/S Drop-ln

Concrete, block, brick, stone

Machine screw or bolt

Zinc alloy and steel

1/4" to 1/2"

Versatile medium duty anchor for use in hollow or solid masonry.

Lag shield

Mortar joint, concrete

Lag bolt

Rustproof zinc alloy

1/4" to 3/4"

Internally threaded light to medium duty anchor which is expended by tightening a lag bolt.

Multi-Calk

Concrete, brick, stone

Machine screw or bolt

Zinc alloy and lead

1/2" to 1"

Heavy duty multi-unit calking anchor for use with threaded rod or reinforcing bar.

Nylon Nailin

Concrete block, brick, Wallboard

No other fastener needed

Nylon and steel

3/16" x 1" to 1/4" x 6

Pin drive anchor in 3 head styles. Available with S/S nails.

Pipe SPIKE®

Concrete

Threaded rod

Steel

1/4" and 3/8"

Vibration-resistant anchor for supporting pipe systems overhead anchor

Poly-Toggle®

Wallboard or solid masonry

Sheet metal screw

Polypropylene

1/8" to 1"

Economical light duty toggle anchor for use in hollow Walls., .

Rawl DRIVE™

Concrete, stone

No other fastener needed

Steel

3/16" x 1" to 1/2" x 6"

One-piece expansion anchor. Heat-treated for maximum shear strength, 4 head styles.

Rawl-Bolt®

Concrete, block, Stone

No other fastener needed

Steel (grade 5 bolt)

1/4" x 1-3/4" to 3/4" x 8-1/4"

Preassembled heavy duty anchor with a finished hex head Removable and vibration-resistant

Rawly

Wallboard, plaster, paneling

No other fastener needed

Steel

1/8" extra short to 1/4" extra long

Single unit, light duty anchor for use in hollow walls.

Saber-Tooth (Self-Drill)

Concrete

Machine screw or bolt

Steel

1/4" to 7/8"

Sell-drilling anchor which can be installed using a rotary hammer drill or manually.

Scru-Lead

Concrete block, brick

Sheet metal, wood or lag screw

Lead alloy

#6-8 x 3/4" to #16-18 x 1-1/2"

Light duty, multi-size anchor for use with static loads.

Set-Bolt, (Stud-Anchor)

Concrete, stone

Nut and Washer

Steel

1/4" x 1-3/4" to 3/4" x 8-1/2"

One-piece stud bolt anchor. Bottom plug expansion style.

Single Machine Bolt Shield

Concrete, brick, stone

Machine screw or bolt

Rustproof zinc alloy

1/4" to 3/4"

Non calking bolt anchor which is easy to install. Tightening bolt sets anchor.

Sleeve Anchor

Concrete, block, brick, stone

No other fastener needed

Steel

1/4" x 5/8" to 3/4" x 7-1/2"

Pre-assembled, all-purpose, medium duty anchor with 7 head styles.

SPIKE®

Concrete, dense brick, stone

No other fastener needed

Steel

3/16" x 1" to 3/8" x 5"

One-piece, light duty, vibration-resistant anchor available in three diameters

Stainless Steel SPIKE®

Concrete, block, brick

EPDM washer

304 stainless steel

3/16" x 1" to 3/8" x 4"

One-piece, vibration-resistant, corrosion-resistant anchor

Steel Drop-In

Concrete, stone

Machine screw or bolt

Steel and Stainless steel

1/4" to 3/4"

Heavy duty female anchor with pre-assembled internal plug.

TAPCON®

Concrete, block, brick

No other fastener needed

Steel

3/16" x 1-1/4" to 1/4" x 6"

Concrete screw anchor for use in light duty applications. Available in two head styles.

Tie-Wire SPIKE®

Concrete

Suspended acoustical ceilings

Steel

1/4"

One-piece, vibration resistant anchor which accepts up to no. 6 gauge wire.

Toggle Bolt

Hollow block, wallboard, plaster

No other fastener needed

Steel, stainless steel

1/8" x 2" to 1/2" x 6"

Medium duty steel anchor for use in hollow walls.

Toggler® Alligator

Solid Wall, Hollow Wall

Sheet metal screw

Polypropylene

Anchor sizes 3/16", 1/4" and 5/16"

Vibration proof, Nonconductive, acid resistent and corrision-proof

Toggler® Hollow Wall and Specialty Anchors

Wallboard, Thin Panel, Drywall

Sheet metal screw

Polypropylene

Grip Range 1/8" to 1"

Anchor size 5/16"

Economical light duty toggle anchor for use in hollow Walls. Specialty anchors available for Picture/wire hook, Wire Shelf, Shelving, Pegboard and wire harness.

Toggler® Toggle Bolt

Hollow block, wallboard, plaster

No other fastener needed

Steel, stainless steel

Grip Range 3/8"x9-1/2"

Bolt Size 3/16" to 1/2"

.Highest published holding strength and fastest installation.

Wedge Anchor

Concrete, stone

No other fastener needed

Steel, 303 & 316 S.S., galvanized

1/4" x 1-3/4" to 1-1/4" x 12"

Heavy duty one-piece expansion bolt. Custom lengths on special order.

Zamac Nailin

Concrete block, brick, stone

No other fastener needed

Zinc alloy and steel

3/16" x 7/8" to 1/4" x 2"

Pin drive anchor in mushroom or flat head styles. Available with S/S nails.

Zinc SPIKE®

Concrete, block, brick

No other fastener needed

Solid Zamac Alloy

1/4" X 1-1/4"

One-piece vibration-resistant, corrosion-resistant anchor. Available with EPDM washer

ZlP-It®

Wallboard

Sheet metal screw

DuPont Zytel Nylon Zamac

3/8" to 1"

Economical, nonconductive, corrosion-resistant screw anchor for all thickness of wallboard.