asbclogr.gif (5107 bytes)

 als.gif (3154 bytes) iso_sign_1.jpg (30237 bytes)
SUCCESSORS TO LEBOVITZ BROTHERS
red.gif (38700 bytes)
DISTRIBUTORS OF FASTENERS INDUSTRIAL & MILL SUPPLIES
SINCE 1918
red.gif (38700 bytes)
1900 W. GRAND AVE. CHICAGO, ILLINOIS 60622
312-733-1900 * FAX 312-733-9887

Home Up Search Feedback Table of Contents Directions

Anchors Bolts Forged Hardware Inserts Nuts Rivets Screws Threaded Rod Washers

Forged Hardware      

TYPE

Made of

SIZE RANGE

GENERAL INFORMATION
Eye Bolts with nuts Stainless Steel 1/4" x 2 to 1" x 6" These fittings are used in place of carbon steel fittings for marine and food processing applications and where fittings are exposed to oxidizing acids, alkalis, neutral brines and detrimental temperatures.
Eye Nuts Stainless Steel 1/4" to 3/4" These fittings are used in place of carbon steel fittings for marine and food processing applications and where fittings are exposed to oxidizing acids, alkalis, neutral brines and detrimental temperatures.
Lifting Eyes Stainless Steel 1/4" to 1-1/4" These fittings are used in place of carbon steel fittings for marine and food processing applications and where fittings are exposed to oxidizing acids, alkalis, neutral brines and detrimental temperatures.
Turnbuckles with stubs Stainless Steel 1/4"dia x 4" take-up,  to 1"dia x 6" take-up These fittings are used in place of carbon steel fittings for marine and food processing applications and where fittings are exposed to oxidizing acids, alkalis, neutral brines and detrimental temperatures.
Turnbuckles with jaw & eye Stainless Steel 1/4"dia x 4" take-up,  to 1"dia x 6" take-up These fittings are used in place of carbon steel fittings for marine and food processing applications and where fittings are exposed to oxidizing acids, alkalis, neutral brines and detrimental temperatures.
Turnbuckles with eye & eye Stainless Steel 1/4"dia x 4" take-up,  to 1"dia x 6" take-up These fittings are used in place of carbon steel fittings for marine and food processing applications and where fittings are exposed to oxidizing acids, alkalis, neutral brines and detrimental temperatures.
Turnbuckles with jaw & jaw Stainless Steel 1/4"dia x 4" take-up,  to 1"dia x 6" take-up These fittings are used in place of carbon steel fittings for marine and food processing applications and where fittings are exposed to oxidizing acids, alkalis, neutral brines and detrimental temperatures.