Our Products

1 1/4" 12pt Socket 1/2" Drive

The 12-point shaped socket offers double the number of starting points or possible positions by which to put the socket on the nut, and so allows alignment every 30 degrees, rather than every 60 degrees of angle.

1 1/4" 6pt Impact Socket 3/4" Drive

Impact sockets are specifically designed and manufactured for impact gun use, and are nearly always made from a thicker, tougher and more ductile alloy steel that is then heat treated for extra durability.

1 1/4" x 2" Annular Cutter

Drill a burr-free hole by cutting around the hole and ejecting the center as a usable slug. Annular Cutters require far less horsepower than twist drills of comparable size when run at the same feed rate. As a result, cutters can be run at higher feeds...

1 1/4-7 A194 2H Heavy Hex Nut

Structural nuts are about 10% taller and wider than standard hex nuts and distribute the load over a large area. Also known as heavy hex nuts, these nuts are designed to secure ASTM A325 bolts in structural joints.

1 1/8" 12pt Deep Socket 1/2" Drive

The 12-point shaped socket offers double the number of starting points or possible positions by which to put the socket on the nut, and so allows alignment every 30 degrees, rather than every 60 degrees of angle.

1 1/8" 12pt Socket 1/2" Drive

The 12-point shaped socket offers double the number of starting points or possible positions by which to put the socket on the nut, and so allows alignment every 30 degrees, rather than every 60 degrees of angle.

1 1/8" 12pt Socket 3/4" Drive

The 12-point shaped socket offers double the number of starting points or possible positions by which to put the socket on the nut, and so allows alignment every 30 degrees, rather than every 60 degrees of angle.

1 1/8" 6pt Deep Socket 1/2" Drive

6 point, hexagon, for hexagonal nuts.

1 1/8" 6pt Impact Socket 3/4" Drive

Impact sockets are specifically designed and manufactured for impact gun use, and are nearly always made from a thicker, tougher and more ductile alloy steel that is then heat treated for extra durability.

1 1/8" x 2" Annular Cutter

Drill a burr-free hole by cutting around the hole and ejecting the center as a usable slug. Annular Cutters require far less horsepower than twist drills of comparable size when run at the same feed rate. As a result, cutters can be run at higher feeds...

1 1/8-7 A194 2H Heavy Hex Nut

Structural nuts are about 10% taller and wider than standard hex nuts and distribute the load over a large area. Also known as heavy hex nuts, these nuts are designed to secure ASTM A325 bolts in structural joints.

1 1/8-7 Finished Hex Nut Zinc Plated (Each)